This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by gobject-introspection configure 1.40.0, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --build=i686-uhu-linux --host=i686-uhu-linux --disable-static CFLAGS=-O2 -march=i686 -mtune=generic ## --------- ## ## Platform. ## ## --------- ## hostname = hp11 uname -m = i686 uname -r = 3.15.0-rc8-2.i386 uname -s = Linux uname -v = #2 SMP Thu Jun 5 11:08:29 UTC 2014 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/lib/uhubuild PATH: /usr/lib/ccache PATH: /sbin PATH: /usr/sbin PATH: /bin PATH: /usr/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2604: checking for a BSD-compatible install configure:2672: result: /bin/install -c configure:2683: checking whether build environment is sane configure:2738: result: yes configure:2889: checking for a thread-safe mkdir -p configure:2928: result: /bin/mkdir -p configure:2935: checking for gawk configure:2951: found /bin/gawk configure:2962: result: gawk configure:2973: checking whether make sets $(MAKE) configure:2995: result: yes configure:3024: checking whether make supports nested variables configure:3041: result: yes configure:3130: checking whether UID '82' is supported by ustar format configure:3133: result: yes configure:3140: checking whether GID '82' is supported by ustar format configure:3143: result: yes configure:3151: checking how to create a ustar tar archive configure:3162: tar --version tar (GNU tar) 1.27.1 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later . This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by John Gilmore and Jay Fenlason. configure:3165: $? = 0 configure:3205: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar configure:3208: $? = 0 configure:3212: tar -xf - &5 i686-uhu-linux-gcc (GCC) 4.8.3 Copyright (C) 2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3723: $? = 0 configure:3712: i686-uhu-linux-gcc -v >&5 Using built-in specs. COLLECT_GCC=i686-uhu-linux-gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/i686-uhu-linux/4.8.3/lto-wrapper Target: i686-uhu-linux Configured with: /var/uhubuild/work/compile/configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --build=i686-uhu-linux --host=i686-uhu-linux --target=i686-uhu-linux --enable-languages=c,c++,objc,java,fortran --enable-shared --enable-targets=all --disable-multilib --with-gnu-as --with-gnu-ld --with-system-zlib --with-arch-32=i686 --with-arch-64=core2 --with-cpu-32=i686 --with-cpu-64=core2 --with-tune=generic Thread model: posix gcc version 4.8.3 (GCC) configure:3723: $? = 0 configure:3712: i686-uhu-linux-gcc -V >&5 i686-uhu-linux-gcc: error: unrecognized command line option '-V' i686-uhu-linux-gcc: fatal error: no input files compilation terminated. configure:3723: $? = 1 configure:3712: i686-uhu-linux-gcc -qversion >&5 i686-uhu-linux-gcc: error: unrecognized command line option '-qversion' i686-uhu-linux-gcc: fatal error: no input files compilation terminated. configure:3723: $? = 1 configure:3743: checking whether the C compiler works configure:3765: i686-uhu-linux-gcc -O2 -march=i686 -mtune=generic conftest.c >&5 configure:3769: $? = 0 configure:3817: result: yes configure:3820: checking for C compiler default output file name configure:3822: result: a.out configure:3828: checking for suffix of executables configure:3835: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic conftest.c >&5 configure:3839: $? = 0 configure:3861: result: configure:3883: checking whether we are cross compiling configure:3891: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic conftest.c >&5 configure:3895: $? = 0 configure:3902: ./conftest configure:3906: $? = 0 configure:3921: result: no configure:3926: checking for suffix of object files configure:3948: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:3952: $? = 0 configure:3973: result: o configure:3977: checking whether we are using the GNU C compiler configure:3996: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:3996: $? = 0 configure:4005: result: yes configure:4014: checking whether i686-uhu-linux-gcc accepts -g configure:4034: i686-uhu-linux-gcc -c -g conftest.c >&5 configure:4034: $? = 0 configure:4075: result: yes configure:4092: checking for i686-uhu-linux-gcc option to accept ISO C89 configure:4155: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:4155: $? = 0 configure:4168: result: none needed configure:4199: checking for style of include used by make configure:4227: result: GNU configure:4253: checking dependency style of i686-uhu-linux-gcc configure:4364: result: gcc3 configure:4380: checking whether i686-uhu-linux-gcc and cc understand -c and -o together configure:4411: i686-uhu-linux-gcc -c conftest.c -o conftest2.o >&5 configure:4415: $? = 0 configure:4421: i686-uhu-linux-gcc -c conftest.c -o conftest2.o >&5 configure:4425: $? = 0 configure:4436: cc -c conftest.c >&5 configure:4440: $? = 0 configure:4448: cc -c conftest.c -o conftest2.o >&5 configure:4452: $? = 0 configure:4458: cc -c conftest.c -o conftest2.o >&5 configure:4462: $? = 0 configure:4480: result: yes configure:4555: checking how to print strings configure:4582: result: printf configure:4603: checking for a sed that does not truncate output configure:4667: result: /bin/sed configure:4685: checking for grep that handles long lines and -e configure:4743: result: /bin/grep configure:4748: checking for egrep configure:4810: result: /bin/grep -E configure:4815: checking for fgrep configure:4877: result: /bin/grep -F configure:4912: checking for ld used by i686-uhu-linux-gcc configure:4979: result: /usr/bin/ld configure:4986: checking if the linker (/usr/bin/ld) is GNU ld configure:5001: result: yes configure:5013: checking for BSD- or MS-compatible name lister (nm) configure:5062: result: /usr/bin/nm -B configure:5192: checking the name lister (/usr/bin/nm -B) interface configure:5199: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:5202: /usr/bin/nm -B "conftest.o" configure:5205: output 00000000 B some_variable configure:5212: result: BSD nm configure:5215: checking whether ln -s works configure:5219: result: yes configure:5227: checking the maximum length of command line arguments configure:5357: result: 1572864 configure:5374: checking whether the shell understands some XSI constructs configure:5384: result: yes configure:5388: checking whether the shell understands "+=" configure:5394: result: yes configure:5429: checking how to convert i686-uhu-linux-gnu file names to i686-uhu-linux-gnu format configure:5469: result: func_convert_file_noop configure:5476: checking how to convert i686-uhu-linux-gnu file names to toolchain format configure:5496: result: func_convert_file_noop configure:5503: checking for /usr/bin/ld option to reload object files configure:5510: result: -r configure:5544: checking for i686-uhu-linux-objdump configure:5574: result: no configure:5584: checking for objdump configure:5600: found /usr/bin/objdump configure:5611: result: objdump configure:5643: checking how to recognize dependent libraries configure:5845: result: pass_all configure:5890: checking for i686-uhu-linux-dlltool configure:5920: result: no configure:5930: checking for dlltool configure:5960: result: no configure:5990: checking how to associate runtime and link libraries configure:6017: result: printf %s\n configure:6034: checking for i686-uhu-linux-ar configure:6050: found /usr/bin/i686-uhu-linux-ar configure:6061: result: i686-uhu-linux-ar configure:6142: checking for archiver @FILE support configure:6159: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:6159: $? = 0 configure:6162: i686-uhu-linux-ar cru libconftest.a @conftest.lst >&5 configure:6165: $? = 0 configure:6170: i686-uhu-linux-ar cru libconftest.a @conftest.lst >&5 i686-uhu-linux-ar: conftest.o: No such file or directory configure:6173: $? = 1 configure:6185: result: @ configure:6203: checking for i686-uhu-linux-strip configure:6233: result: no configure:6243: checking for strip configure:6259: found /usr/bin/strip configure:6270: result: strip configure:6302: checking for i686-uhu-linux-ranlib configure:6332: result: no configure:6342: checking for ranlib configure:6358: found /usr/bin/ranlib configure:6369: result: ranlib configure:6471: checking command to parse /usr/bin/nm -B output from i686-uhu-linux-gcc object configure:6591: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:6594: $? = 0 configure:6598: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:6601: $? = 0 configure:6667: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic conftest.c conftstm.o >&5 configure:6670: $? = 0 configure:6708: result: ok configure:6745: checking for sysroot configure:6775: result: no configure:6991: checking for i686-uhu-linux-mt configure:7021: result: no configure:7031: checking for mt configure:7061: result: no configure:7081: checking if : is a manifest tool configure:7087: : '-?' configure:7095: result: no configure:7737: checking how to run the C preprocessor configure:7768: i686-uhu-linux-gcc -E conftest.c configure:7768: $? = 0 configure:7782: i686-uhu-linux-gcc -E conftest.c conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory #include ^ compilation terminated. configure:7782: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "gobject-introspection" | #define PACKAGE_TARNAME "gobject-introspection" | #define PACKAGE_VERSION "1.40.0" | #define PACKAGE_STRING "gobject-introspection 1.40.0" | #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection" | #define PACKAGE_URL "" | #define PACKAGE "gobject-introspection" | #define VERSION "1.40.0" | /* end confdefs.h. */ | #include configure:7807: result: i686-uhu-linux-gcc -E configure:7827: i686-uhu-linux-gcc -E conftest.c configure:7827: $? = 0 configure:7841: i686-uhu-linux-gcc -E conftest.c conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory #include ^ compilation terminated. configure:7841: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "gobject-introspection" | #define PACKAGE_TARNAME "gobject-introspection" | #define PACKAGE_VERSION "1.40.0" | #define PACKAGE_STRING "gobject-introspection 1.40.0" | #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection" | #define PACKAGE_URL "" | #define PACKAGE "gobject-introspection" | #define VERSION "1.40.0" | /* end confdefs.h. */ | #include configure:7870: checking for ANSI C header files configure:7890: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7890: $? = 0 configure:7963: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7963: $? = 0 configure:7963: ./conftest configure:7963: $? = 0 configure:7974: result: yes configure:7987: checking for sys/types.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for sys/stat.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for stdlib.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for string.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for memory.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for strings.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for inttypes.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for stdint.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:7987: checking for unistd.h configure:7987: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:7987: $? = 0 configure:7987: result: yes configure:8001: checking for dlfcn.h configure:8001: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:8001: $? = 0 configure:8001: result: yes configure:8207: checking for objdir configure:8222: result: .libs configure:8493: checking if i686-uhu-linux-gcc supports -fno-rtti -fno-exceptions configure:8511: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C [enabled by default] configure:8515: $? = 0 configure:8528: result: no configure:8855: checking for i686-uhu-linux-gcc option to produce PIC configure:8862: result: -fPIC -DPIC configure:8870: checking if i686-uhu-linux-gcc PIC flag -fPIC -DPIC works configure:8888: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic -fPIC -DPIC -DPIC conftest.c >&5 configure:8892: $? = 0 configure:8905: result: yes configure:8934: checking if i686-uhu-linux-gcc static flag -static works configure:8962: result: yes configure:8977: checking if i686-uhu-linux-gcc supports -c -o file.o configure:8998: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic -o out/conftest2.o conftest.c >&5 configure:9002: $? = 0 configure:9024: result: yes configure:9032: checking if i686-uhu-linux-gcc supports -c -o file.o configure:9079: result: yes configure:9112: checking whether the i686-uhu-linux-gcc linker (/usr/bin/ld) supports shared libraries configure:10265: result: yes configure:10302: checking whether -lc should be explicitly linked in configure:10310: i686-uhu-linux-gcc -c -O2 -march=i686 -mtune=generic conftest.c >&5 configure:10313: $? = 0 configure:10328: i686-uhu-linux-gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /bin/grep -lc \>/dev/null 2\>\&1 configure:10331: $? = 0 configure:10345: result: no configure:10505: checking dynamic linker characteristics configure:11016: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic -Wl,-rpath -Wl,/foo conftest.c >&5 configure:11016: $? = 0 configure:11242: result: GNU/Linux ld.so configure:11349: checking how to hardcode library paths into programs configure:11374: result: immediate configure:11914: checking whether stripping libraries is possible configure:11919: result: yes configure:11954: checking if libtool supports shared libraries configure:11956: result: yes configure:11959: checking whether to build shared libraries configure:11980: result: yes configure:11983: checking whether to build static libraries configure:11987: result: no configure:12036: checking for i686-uhu-linux-pkg-config configure:12069: result: no configure:12079: checking for pkg-config configure:12097: found /usr/bin/pkg-config configure:12109: result: /usr/bin/pkg-config configure:12134: checking pkg-config is at least version 0.9.0 configure:12137: result: yes configure:12150: checking for flex configure:12166: found /usr/bin/flex configure:12177: result: flex configure:12215: flex conftest.l configure:12219: $? = 0 configure:12221: checking lex output file root configure:12235: result: lex.yy configure:12240: checking lex library configure:12254: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic conftest.c >&5 /tmp/ccFQxT1J.o: In function `yylex': conftest.c:(.text+0x9ce): undefined reference to `yywrap' conftest.c:(.text+0xde6): undefined reference to `yywrap' /tmp/ccFQxT1J.o: In function `main': conftest.c:(.text.startup+0xf): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:12254: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "gobject-introspection" | #define PACKAGE_TARNAME "gobject-introspection" | #define PACKAGE_VERSION "1.40.0" | #define PACKAGE_STRING "gobject-introspection 1.40.0" | #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection" | #define PACKAGE_URL "" | #define PACKAGE "gobject-introspection" | #define VERSION "1.40.0" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 37 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 469 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | yy_size_t yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 653 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 792 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register yy_size_t number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:12254: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic conftest.c -lfl >&5 configure:12254: $? = 0 configure:12264: result: -lfl configure:12270: checking whether yytext is a pointer configure:12287: i686-uhu-linux-gcc -o conftest -O2 -march=i686 -mtune=generic conftest.c -lfl >&5 configure:12287: $? = 0 configure:12295: result: yes configure:12313: checking for bison configure:12329: found /usr/bin/bison configure:12340: result: bison -y configure:12379: checking for dlopen in -ldl configure:12404: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:12404: $? = 0 configure:12413: result: yes configure:12425: checking for the suffix of shared libraries configure:12436: result: .so configure:12649: checking for GLIB configure:12656: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.36.0" configure:12659: $? = 0 configure:12673: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.36.0" configure:12676: $? = 0 configure:12734: result: yes configure:12740: checking for GOBJECT configure:12747: $PKG_CONFIG --exists --print-errors "gobject-2.0" configure:12750: $? = 0 configure:12764: $PKG_CONFIG --exists --print-errors "gobject-2.0" configure:12767: $? = 0 configure:12825: result: yes configure:12831: checking for GMODULE configure:12838: $PKG_CONFIG --exists --print-errors "gmodule-2.0" configure:12841: $? = 0 configure:12855: $PKG_CONFIG --exists --print-errors "gmodule-2.0" configure:12858: $? = 0 configure:12916: result: yes configure:12922: checking for GIO configure:12929: $PKG_CONFIG --exists --print-errors "gio-2.0" configure:12932: $? = 0 configure:12946: $PKG_CONFIG --exists --print-errors "gio-2.0" configure:12949: $? = 0 configure:13007: result: yes configure:13013: checking for GIO_UNIX configure:13020: $PKG_CONFIG --exists --print-errors "gio-unix-2.0" configure:13023: $? = 0 configure:13037: $PKG_CONFIG --exists --print-errors "gio-unix-2.0" configure:13040: $? = 0 configure:13078: result: yes configure:13105: checking for CAIRO configure:13112: $PKG_CONFIG --exists --print-errors "cairo cairo-gobject" configure:13115: $? = 0 configure:13129: $PKG_CONFIG --exists --print-errors "cairo cairo-gobject" configure:13132: $? = 0 configure:13170: result: yes configure:13212: checking for SCANNER configure:13219: $PKG_CONFIG --exists --print-errors "gobject-2.0 gio-2.0" configure:13222: $? = 0 configure:13236: $PKG_CONFIG --exists --print-errors "gobject-2.0 gio-2.0" configure:13239: $? = 0 configure:13297: result: yes configure:13304: checking for FFI configure:13311: $PKG_CONFIG --exists --print-errors "libffi >= 3.0.0 " configure:13314: $? = 0 configure:13328: $PKG_CONFIG --exists --print-errors "libffi >= 3.0.0 " configure:13331: $? = 0 configure:13369: result: yes configure:13487: checking size of char configure:13492: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:13492: $? = 0 configure:13492: ./conftest configure:13492: $? = 0 configure:13506: result: 1 configure:13520: checking size of short configure:13525: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:13525: $? = 0 configure:13525: ./conftest configure:13525: $? = 0 configure:13539: result: 2 configure:13553: checking size of int configure:13558: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:13558: $? = 0 configure:13558: ./conftest configure:13558: $? = 0 configure:13572: result: 4 configure:13586: checking size of long configure:13591: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:13591: $? = 0 configure:13591: ./conftest configure:13591: $? = 0 configure:13605: result: 4 configure:13618: checking for GIREPO configure:13625: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.24.0 gobject-2.0 gmodule-2.0 gio-2.0" configure:13628: $? = 0 configure:13642: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.24.0 gobject-2.0 gmodule-2.0 gio-2.0" configure:13645: $? = 0 configure:13703: result: yes configure:13724: checking for gtkdoc-check configure:13757: result: no configure:13766: checking for gtkdoc-rebase configure:13799: result: no configure:13810: checking for gtkdoc-mkpdf configure:13843: result: no configure:13954: checking whether to build gtk-doc documentation configure:13956: result: no configure:14027: checking for ANSI C header files configure:14131: result: yes configure:14142: checking fcntl.h usability configure:14142: i686-uhu-linux-gcc -c -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c >&5 configure:14142: $? = 0 configure:14142: result: yes configure:14142: checking fcntl.h presence configure:14142: i686-uhu-linux-gcc -E conftest.c configure:14142: $? = 0 configure:14142: result: yes configure:14142: checking for fcntl.h configure:14142: result: yes configure:14142: checking for stdlib.h configure:14142: result: yes configure:14142: checking for string.h configure:14142: result: yes configure:14154: checking for an ANSI C-conforming const configure:14220: i686-uhu-linux-gcc -c -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c >&5 configure:14220: $? = 0 configure:14227: result: yes configure:14237: checking for working strtod configure:14278: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:14278: $? = 0 configure:14278: ./conftest configure:14278: $? = 0 configure:14288: result: yes configure:14353: checking for memchr configure:14353: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 conftest.c:60:6: warning: conflicting types for built-in function 'memchr' [enabled by default] char memchr (); ^ configure:14353: $? = 0 configure:14353: result: yes configure:14353: checking for strchr configure:14353: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 conftest.c:61:6: warning: conflicting types for built-in function 'strchr' [enabled by default] char strchr (); ^ configure:14353: $? = 0 configure:14353: result: yes configure:14353: checking for strspn configure:14353: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 conftest.c:62:6: warning: conflicting types for built-in function 'strspn' [enabled by default] char strspn (); ^ configure:14353: $? = 0 configure:14353: result: yes configure:14353: checking for strstr configure:14353: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 conftest.c:63:6: warning: conflicting types for built-in function 'strstr' [enabled by default] char strstr (); ^ configure:14353: $? = 0 configure:14353: result: yes configure:14353: checking for strtol configure:14353: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:14353: $? = 0 configure:14353: result: yes configure:14353: checking for strtoull configure:14353: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:14353: $? = 0 configure:14353: result: yes configure:14365: checking for backtrace configure:14365: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:14365: $? = 0 configure:14365: result: yes configure:14365: checking for backtrace_symbols configure:14365: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic conftest.c -ldl >&5 configure:14365: $? = 0 configure:14365: result: yes configure:14411: checking for a Python interpreter with version >= 2.6 configure:14428: python -c import sys # split strings by '.' and convert to numeric. Append some zeros # because we need at least 4 digits for the hex conversion. # map returns an iterator in Python 3.0 and a list in 2.x minver = list(map(int, '2.6'.split('.'))) + [0, 0, 0] minverhex = 0 # xrange is not present in Python 3.0 and range returns an iterator for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[i] sys.exit(sys.hexversion < minverhex) configure:14431: $? = 0 configure:14437: result: python configure:14445: checking for python configure:14463: found /usr/bin/python configure:14475: result: /usr/bin/python configure:14493: checking for python version configure:14500: result: 2.7 configure:14512: checking for python platform configure:14519: result: linux2 configure:14545: checking for python script directory configure:14580: result: ${prefix}/lib/python2.7/site-packages configure:14589: checking for python extension module directory configure:14624: result: ${exec_prefix}/lib/python2.7/site-packages configure:14645: checking for headers required to compile python extensions configure:14655: i686-uhu-linux-gcc -E -I/usr/include/python2.7 -I/usr/include/python2.7 conftest.c configure:14655: $? = 0 configure:14656: result: found configure:14719: checking for python module mako configure:14749: result: no configure:14775: checking for glib source directory to use for documentation configure:14794: result: configure:14802: checking for -Bsymbolic-functions linker flag configure:14816: i686-uhu-linux-gcc -o conftest -fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic -Wl,-Bsymbolic-functions conftest.c -ldl >&5 conftest.c: In function 'main': conftest.c:49:5: warning: 'main' is normally a non-static function [-Wmain] int main (void) { return 0; } ^ configure:14816: $? = 0 configure:14817: result: yes configure:14948: checking that generated files are newer than configure configure:14954: result: done configure:15021: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by gobject-introspection config.status 1.40.0, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on hp11 config.status:1203: creating Makefile config.status:1203: creating tests/Makefile config.status:1203: creating tests/offsets/Makefile config.status:1203: creating tests/scanner/Makefile config.status:1203: creating tests/scanner/annotationparser/Makefile config.status:1203: creating tests/repository/Makefile config.status:1203: creating tests/warn/Makefile config.status:1203: creating docs/Makefile config.status:1203: creating docs/reference/Makefile config.status:1203: creating docs/reference/version.xml config.status:1203: creating gobject-introspection-1.0.pc config.status:1203: creating gobject-introspection-no-export-1.0.pc config.status:1203: creating config.h.win32 config.status:1203: creating build/Makefile config.status:1203: creating build/win32/Makefile config.status:1203: creating build/win32/vs9/Makefile config.status:1203: creating build/win32/vs10/Makefile config.status:1203: creating config.h config.status:1432: executing depfiles commands config.status:1432: executing libtool commands ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=i686-uhu-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_c_const=yes ac_cv_env_CAIRO_CFLAGS_set= ac_cv_env_CAIRO_CFLAGS_value= ac_cv_env_CAIRO_LIBS_set= ac_cv_env_CAIRO_LIBS_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-O2 -march=i686 -mtune=generic ' ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_FFI_CFLAGS_set= ac_cv_env_FFI_CFLAGS_value= ac_cv_env_FFI_LIBS_set= ac_cv_env_FFI_LIBS_value= ac_cv_env_GIO_CFLAGS_set= ac_cv_env_GIO_CFLAGS_value= ac_cv_env_GIO_LIBS_set= ac_cv_env_GIO_LIBS_value= ac_cv_env_GIO_UNIX_CFLAGS_set= ac_cv_env_GIO_UNIX_CFLAGS_value= ac_cv_env_GIO_UNIX_LIBS_set= ac_cv_env_GIO_UNIX_LIBS_value= ac_cv_env_GIREPO_CFLAGS_set= ac_cv_env_GIREPO_CFLAGS_value= ac_cv_env_GIREPO_LIBS_set= ac_cv_env_GIREPO_LIBS_value= ac_cv_env_GLIB_CFLAGS_set= ac_cv_env_GLIB_CFLAGS_value= ac_cv_env_GLIB_LIBS_set= ac_cv_env_GLIB_LIBS_value= ac_cv_env_GMODULE_CFLAGS_set= ac_cv_env_GMODULE_CFLAGS_value= ac_cv_env_GMODULE_LIBS_set= ac_cv_env_GMODULE_LIBS_value= ac_cv_env_GOBJECT_CFLAGS_set= ac_cv_env_GOBJECT_CFLAGS_value= ac_cv_env_GOBJECT_LIBS_set= ac_cv_env_GOBJECT_LIBS_value= ac_cv_env_GTKDOC_DEPS_CFLAGS_set= ac_cv_env_GTKDOC_DEPS_CFLAGS_value= ac_cv_env_GTKDOC_DEPS_LIBS_set= ac_cv_env_GTKDOC_DEPS_LIBS_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_PKG_CONFIG_LIBDIR_set= ac_cv_env_PKG_CONFIG_LIBDIR_value= ac_cv_env_PKG_CONFIG_PATH_set= ac_cv_env_PKG_CONFIG_PATH_value= ac_cv_env_PKG_CONFIG_set= ac_cv_env_PKG_CONFIG_value= ac_cv_env_PYTHON_set= ac_cv_env_PYTHON_value= ac_cv_env_SCANNER_CFLAGS_set= ac_cv_env_SCANNER_CFLAGS_value= ac_cv_env_SCANNER_LIBS_set= ac_cv_env_SCANNER_LIBS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=i686-uhu-linux ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=i686-uhu-linux ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_backtrace=yes ac_cv_func_backtrace_symbols=yes ac_cv_func_memchr=yes ac_cv_func_strchr=yes ac_cv_func_strspn=yes ac_cv_func_strstr=yes ac_cv_func_strtod=yes ac_cv_func_strtol=yes ac_cv_func_strtoull=yes ac_cv_header_dlfcn_h=yes ac_cv_header_fcntl_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=i686-uhu-linux-gnu ac_cv_lib_dl_dlopen=yes ac_cv_lib_lex=-lfl ac_cv_objext=o ac_cv_path_EGREP='/bin/grep -E' ac_cv_path_FGREP='/bin/grep -F' ac_cv_path_GREP=/bin/grep ac_cv_path_PYTHON=/usr/bin/python ac_cv_path_SED=/bin/sed ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config ac_cv_path_install='/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AR=i686-uhu-linux-ar ac_cv_prog_AWK=gawk ac_cv_prog_CC=i686-uhu-linux-gcc ac_cv_prog_CPP='i686-uhu-linux-gcc -E' ac_cv_prog_LEX=flex ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_OBJDUMP=objdump ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cc_i686_uhu_linux_gcc_c_o=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes ac_cv_prog_make_make_set=yes ac_cv_sizeof_char=1 ac_cv_sizeof_int=4 ac_cv_sizeof_long=4 ac_cv_sizeof_short=2 am_cv_CC_dependencies_compiler_type=gcc3 am_cv_make_support_nested_variables=yes am_cv_pathless_PYTHON=python am_cv_prog_tar_ustar=gnutar am_cv_python_platform=linux2 am_cv_python_pyexecdir='${exec_prefix}/lib/python2.7/site-packages' am_cv_python_pythondir='${prefix}/lib/python2.7/site-packages' am_cv_python_version=2.7 lt_cv_ar_at_file=@ lt_cv_archive_cmds_need_lc=no lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/usr/bin/ld lt_cv_path_NM='/usr/bin/nm -B' lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_gnu_ld=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=no lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_max_cmd_len=1572864 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop pkg_cv_CAIRO_CFLAGS='-I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_CAIRO_LIBS='-lcairo-gobject -lcairo -lgobject-2.0 -lglib-2.0 ' pkg_cv_FFI_CFLAGS='-I/usr/lib/libffi-3.0.13/include ' pkg_cv_FFI_LIBS='-lffi ' pkg_cv_GIO_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_GIO_LIBS='-lgio-2.0 -lgobject-2.0 -lglib-2.0 ' pkg_cv_GIO_UNIX_CFLAGS='-pthread -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_GIO_UNIX_LIBS='-lgio-2.0 -lgobject-2.0 -lglib-2.0 ' pkg_cv_GIREPO_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_GIREPO_LIBS='-Wl,--export-dynamic -lgmodule-2.0 -pthread -lgio-2.0 -lgobject-2.0 -lglib-2.0 ' pkg_cv_GLIB_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_GLIB_LIBS='-lglib-2.0 ' pkg_cv_GMODULE_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_GMODULE_LIBS='-Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0 ' pkg_cv_GOBJECT_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_GOBJECT_LIBS='-lgobject-2.0 -lglib-2.0 ' pkg_cv_SCANNER_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' pkg_cv_SCANNER_LIBS='-lgio-2.0 -lgobject-2.0 -lglib-2.0 ' py_cv_mod_mako_=no ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /var/uhubuild/work/compile/build-aux/missing aclocal-1.13' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='0' AM_V='$(V)' AR='i686-uhu-linux-ar' AUTOCONF='${SHELL} /var/uhubuild/work/compile/build-aux/missing autoconf' AUTOHEADER='${SHELL} /var/uhubuild/work/compile/build-aux/missing autoheader' AUTOMAKE='${SHELL} /var/uhubuild/work/compile/build-aux/missing automake-1.13' AWK='gawk' BUILD_DOCTOOL_FALSE='' BUILD_DOCTOOL_TRUE='#' CAIRO_CFLAGS='-I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' CAIRO_GIR_PACKAGE='cairo-gobject' CAIRO_LIBS='-lcairo-gobject -lcairo -lgobject-2.0 -lglib-2.0 ' CAIRO_SHARED_LIBRARY='libcairo-gobject.so.2' CC='i686-uhu-linux-gcc' CCDEPMODE='depmode=gcc3' CFLAGS='-fno-strict-aliasing -Wsign-compare -Wcast-align -Wpointer-arith -Wnested-externs -Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wall -O2 -march=i686 -mtune=generic' CPP='i686-uhu-linux-gcc -E' CPPFLAGS='' CYGPATH_W='echo' DEFS='-DHAVE_CONFIG_H' DEPDIR='.deps' DLLTOOL='false' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/bin/grep -E' ENABLE_GTK_DOC_FALSE='' ENABLE_GTK_DOC_TRUE='#' EXEEXT='' EXPANDED_BINDIR='/usr/bin' EXPANDED_DATADIR='/usr/share' EXPANDED_LIBDIR='/usr/lib' EXPANDED_LIBEXECDIR='/usr/libexec' EXPANDED_LOCALSTATEDIR='/var' EXPANDED_SYSCONFDIR='/etc' EXTRA_LINK_FLAGS='-Wl,-Bsymbolic-functions' FFI_CFLAGS='-I/usr/lib/libffi-3.0.13/include ' FFI_LIBS='-lffi ' FFI_PC_CFLAGS='' FFI_PC_LIBS='' FFI_PC_PACKAGES='libffi' FGREP='/bin/grep -F' GIO_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' GIO_LIBS='-lgio-2.0 -lgobject-2.0 -lglib-2.0 ' GIO_UNIX_CFLAGS='-pthread -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' GIO_UNIX_LIBS='-lgio-2.0 -lgobject-2.0 -lglib-2.0 ' GIREPO_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/libffi-3.0.13/include ' GIREPO_LIBS='-Wl,--export-dynamic -lgmodule-2.0 -pthread -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lffi ' GIR_DIR='/usr/share/gir-1.0' GIR_SUFFIX='gir-1.0' GI_VERSION='1.40.0' GLIBSRC='' GLIB_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' GLIB_LIBS='-lglib-2.0 ' GMODULE_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' GMODULE_LIBS='-Wl,--export-dynamic -lgmodule-2.0 -pthread -lglib-2.0 ' GOBJECT_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' GOBJECT_INTROSPECTION_LIBDIR='/usr/lib' GOBJECT_LIBS='-lgobject-2.0 -lglib-2.0 ' GREP='/bin/grep' GTKDOC_CHECK='' GTKDOC_DEPS_CFLAGS='' GTKDOC_DEPS_LIBS='' GTKDOC_MKPDF='' GTKDOC_REBASE='true' GTK_DOC_BUILD_HTML_FALSE='#' GTK_DOC_BUILD_HTML_TRUE='' GTK_DOC_BUILD_PDF_FALSE='' GTK_DOC_BUILD_PDF_TRUE='#' GTK_DOC_USE_LIBTOOL_FALSE='#' GTK_DOC_USE_LIBTOOL_TRUE='' GTK_DOC_USE_REBASE_FALSE='#' GTK_DOC_USE_REBASE_TRUE='' HAVE_CAIRO_FALSE='#' HAVE_CAIRO_TRUE='' HAVE_GIO_UNIX_FALSE='#' HAVE_GIO_UNIX_TRUE='' HTML_DIR='${datadir}/gtk-doc/html' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LD='/usr/bin/ld' LDFLAGS='' LEX='flex' LEXLIB='-lfl' LEX_OUTPUT_ROOT='lex.yy' LIBOBJS='' LIBS='-ldl ' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIPO='' LN_S='ln -s' LTLIBOBJS='' MAINT='' MAINTAINER_MODE_FALSE='#' MAINTAINER_MODE_TRUE='' MAKEINFO='${SHELL} /var/uhubuild/work/compile/build-aux/missing makeinfo' MANIFEST_TOOL=':' MKDIR_P='/bin/mkdir -p' NM='/usr/bin/nm -B' NMEDIT='' OBJDUMP='objdump' OBJEXT='o' OS_WIN32_FALSE='' OS_WIN32_TRUE='#' OTOOL64='' OTOOL='' PACKAGE='gobject-introspection' PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection' PACKAGE_NAME='gobject-introspection' PACKAGE_STRING='gobject-introspection 1.40.0' PACKAGE_TARNAME='gobject-introspection' PACKAGE_URL='' PACKAGE_VERSION='1.40.0' PATH_SEPARATOR=':' PKG_CONFIG='/usr/bin/pkg-config' PKG_CONFIG_LIBDIR='' PKG_CONFIG_PATH='' POW_LIB='' PYTHON='/usr/bin/python' PYTHON_EXEC_PREFIX='${exec_prefix}' PYTHON_INCLUDES='-I/usr/include/python2.7 -I/usr/include/python2.7' PYTHON_LIBS='' PYTHON_PLATFORM='linux2' PYTHON_PREFIX='${prefix}' PYTHON_VERSION='2.7' RANLIB='ranlib' SCANNER_CFLAGS='-pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include ' SCANNER_LIBS='-lgio-2.0 -lgobject-2.0 -lglib-2.0 ' SED='/bin/sed' SET_MAKE='' SHELL='/bin/sh' STRIP='strip' VERSION='1.40.0' WITH_GLIBSRC_FALSE='' WITH_GLIBSRC_TRUE='#' YACC='bison -y' ac_ct_AR='' ac_ct_CC='' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='#' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='_no' am__quote='' am__tar='tar --format=ustar -chf - "$$tardir"' am__untar='tar -xf -' bindir='${exec_prefix}/bin' build='i686-uhu-linux-gnu' build_alias='i686-uhu-linux' build_cpu='i686' build_os='linux-gnu' build_vendor='uhu' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='${prefix}' host='i686-uhu-linux-gnu' host_alias='i686-uhu-linux' host_cpu='i686' host_os='linux-gnu' host_vendor='uhu' htmldir='${docdir}' includedir='${prefix}/include' infodir='/usr/share/info' install_sh='${SHELL} /var/uhubuild/work/compile/build-aux/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/var' mandir='/usr/share/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' pkgpyexecdir='${pyexecdir}/gobject-introspection' pkgpythondir='${pythondir}/gobject-introspection' prefix='/usr' program_transform_name='s,x,x,' psdir='${docdir}' pyexecdir='${exec_prefix}/lib/python2.7/site-packages' pythondir='${prefix}/lib/python2.7/site-packages' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "gobject-introspection" #define PACKAGE_TARNAME "gobject-introspection" #define PACKAGE_VERSION "1.40.0" #define PACKAGE_STRING "gobject-introspection 1.40.0" #define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=glib&component=introspection" #define PACKAGE_URL "" #define PACKAGE "gobject-introspection" #define VERSION "1.40.0" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define YYTEXT_POINTER 1 #define HAVE_LIBDL 1 #define SHLIB_SUFFIX "so" #define GOBJECT_INTROSPECTION_LIBDIR "/usr/lib" #define GIR_SUFFIX "gir-1.0" #define GIR_DIR "/usr/share/gir-1.0" #define SIZEOF_CHAR 1 #define SIZEOF_SHORT 2 #define SIZEOF_INT 4 #define SIZEOF_LONG 4 #define STDC_HEADERS 1 #define HAVE_FCNTL_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMCHR 1 #define HAVE_STRCHR 1 #define HAVE_STRSPN 1 #define HAVE_STRSTR 1 #define HAVE_STRTOL 1 #define HAVE_STRTOULL 1 #define HAVE_BACKTRACE 1 #define HAVE_BACKTRACE_SYMBOLS 1 configure: exit 0