This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. configure:726: checking host system type configure:748: checking for Cygwin environment configure:764: cc -c -O conftest.c 1>&5 configure: In function `main': configure:760: error: `__CYGWIN32__' undeclared (first use in this function) configure:760: error: (Each undeclared identifier is reported only once configure:760: error: for each function it appears in.) configure: failed program was: #line 753 "configure" #include "confdefs.h" int main() { #ifndef __CYGWIN__ #define __CYGWIN__ __CYGWIN32__ #endif return __CYGWIN__; ; return 0; } configure:781: checking for mingw32 environment configure:793: cc -c -O conftest.c 1>&5 configure: In function `main': configure:789: error: `__MINGW32__' undeclared (first use in this function) configure:789: error: (Each undeclared identifier is reported only once configure:789: error: for each function it appears in.) configure: failed program was: #line 786 "configure" #include "confdefs.h" int main() { return __MINGW32__; ; return 0; } configure:810: checking for EMX/OS2 environment configure:822: cc -c -O conftest.c 1>&5 configure: In function `main': configure:818: error: `__EMX__' undeclared (first use in this function) configure:818: error: (Each undeclared identifier is reported only once configure:818: error: for each function it appears in.) configure: failed program was: #line 815 "configure" #include "confdefs.h" int main() { return __EMX__; ; return 0; } configure:853: checking for executable suffix configure:863: cc -o conftest -O conftest.c 1>&5 configure:884: checking how to run the C preprocessor configure:905: cc -E conftest.c >/dev/null 2>conftest.out configure:966: checking for ranlib configure:994: checking whether make sets ${MAKE} configure:1022: checking for ANSI C header files configure:1035: cc -E conftest.c >/dev/null 2>conftest.out configure:1102: cc -o conftest -O conftest.c 1>&5 configure:1126: checking for UNIX-98 compliant inttypes.h configure:1140: cc -c -O conftest.c 1>&5 configure:1164: checking for dirent.h that defines DIR configure:1177: cc -c -O conftest.c 1>&5 configure:1202: checking for opendir in -ldir configure:1221: cc -o conftest -O conftest.c -ldir 1>&5 /usr/bin/ld: cannot find -ldir collect2: ld returned 1 exit status configure: failed program was: #line 1210 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir(); int main() { opendir() ; return 0; } configure:1285: checking whether stat file-mode macros are broken configure:1341: checking whether time.h and sys/time.h may both be included configure:1355: cc -c -O conftest.c 1>&5 configure:1376: checking for sys/wait.h that is POSIX.1 compatible configure:1397: cc -c -O conftest.c 1>&5 configure:1418: checking if select needs nonstd include files configure:1431: cc -c -O conftest.c 1>&5 configure:1451: checking if sys/select.h is needed for select configure:1468: cc -c -O conftest.c 1>&5 configure:1461: error: syntax error before "do" configure:1464: error: syntax error before numeric constant configure:1464: warning: data definition has no type or storage class configure:1465: error: syntax error before "return" configure: failed program was: #line 1456 "configure" #include "confdefs.h" #include #include #include #ifndef SELECT_NONSTD_HDR do not compile if we do not need nonstandard headers #endif int main() { fd_set rfd; FD_ZERO(&rfd); select(1, &rfd, 0, 0, 0); ; return 0; } configure:1488: checking if sys/socket.h is needed for select configure:1505: cc -c -O conftest.c 1>&5 configure:1498: error: syntax error before "do" configure:1501: error: syntax error before numeric constant configure:1501: warning: data definition has no type or storage class configure:1502: error: syntax error before "return" configure: failed program was: #line 1493 "configure" #include "confdefs.h" #include #include #include #ifndef SELECT_NONSTD_HDR do not compile if we do not need nonstandard headers #endif int main() { fd_set rfd; FD_ZERO(&rfd); select(1, &rfd, 0, 0, 0); ; return 0; } configure:1528: checking for varargs.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out In file included from configure:1534: /usr/lib/gcc/i586-uhu-linux/3.4.6/include/varargs.h:4:2: #error "GCC no longer implements ." /usr/lib/gcc/i586-uhu-linux/3.4.6/include/varargs.h:5:2: #error "Revise your code to use ." configure: failed program was: #line 1533 "configure" #include "confdefs.h" #include configure:1528: checking for stdarg.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1528: checking for stdlib.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1528: checking for stddef.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1528: checking for string.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1528: checking for strings.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1528: checking for unistd.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1528: checking for fcntl.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1528: checking for sys/file.h configure:1538: cc -E conftest.c >/dev/null 2>conftest.out configure:1568: checking for getopt.h configure:1578: cc -E conftest.c >/dev/null 2>conftest.out configure:1608: checking for limits.h configure:1618: cc -E conftest.c >/dev/null 2>conftest.out configure:1648: checking for a.out.h configure:1658: cc -E conftest.c >/dev/null 2>conftest.out configure:1648: checking for aouthdr.h configure:1658: cc -E conftest.c >/dev/null 2>conftest.out configure:1654:21: aouthdr.h: No such file or directory configure: failed program was: #line 1653 "configure" #include "confdefs.h" #include configure:1648: checking for elf.h configure:1658: cc -E conftest.c >/dev/null 2>conftest.out configure:1688: checking for malloc.h configure:1698: cc -E conftest.c >/dev/null 2>conftest.out configure:1688: checking for termios.h configure:1698: cc -E conftest.c >/dev/null 2>conftest.out configure:1688: checking for termio.h configure:1698: cc -E conftest.c >/dev/null 2>conftest.out configure:1728: checking for pwd.h configure:1738: cc -E conftest.c >/dev/null 2>conftest.out configure:1728: checking for grp.h configure:1738: cc -E conftest.c >/dev/null 2>conftest.out configure:1728: checking for sys/acl.h configure:1738: cc -E conftest.c >/dev/null 2>conftest.out configure:1734:21: sys/acl.h: No such file or directory configure: failed program was: #line 1733 "configure" #include "confdefs.h" #include configure:1728: checking for acllib.h configure:1738: cc -E conftest.c >/dev/null 2>conftest.out configure:1734:20: acllib.h: No such file or directory configure: failed program was: #line 1733 "configure" #include "confdefs.h" #include configure:1768: checking for shadow.h configure:1778: cc -E conftest.c >/dev/null 2>conftest.out configure:1768: checking for syslog.h configure:1778: cc -E conftest.c >/dev/null 2>conftest.out configure:1808: checking for sys/time.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1808: checking for sys/times.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1808: checking for utime.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1808: checking for sys/utime.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1814:23: sys/utime.h: No such file or directory configure: failed program was: #line 1813 "configure" #include "confdefs.h" #include configure:1808: checking for sys/ioctl.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1808: checking for sys/filio.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1814:23: sys/filio.h: No such file or directory configure: failed program was: #line 1813 "configure" #include "confdefs.h" #include configure:1808: checking for sys/param.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1808: checking for sys/systeminfo.h configure:1818: cc -E conftest.c >/dev/null 2>conftest.out configure:1814:28: sys/systeminfo.h: No such file or directory configure: failed program was: #line 1813 "configure" #include "confdefs.h" #include configure:1848: checking for sys/syscall.h configure:1858: cc -E conftest.c >/dev/null 2>conftest.out configure:1888: checking for mntent.h configure:1898: cc -E conftest.c >/dev/null 2>conftest.out configure:1888: checking for sys/mntent.h configure:1898: cc -E conftest.c >/dev/null 2>conftest.out configure:1894:24: sys/mntent.h: No such file or directory configure: failed program was: #line 1893 "configure" #include "confdefs.h" #include configure:1888: checking for sys/mnttab.h configure:1898: cc -E conftest.c >/dev/null 2>conftest.out configure:1894:24: sys/mnttab.h: No such file or directory configure: failed program was: #line 1893 "configure" #include "confdefs.h" #include configure:1888: checking for sys/mount.h configure:1898: cc -E conftest.c >/dev/null 2>conftest.out configure:1928: checking for wait.h configure:1938: cc -E conftest.c >/dev/null 2>conftest.out configure:1928: checking for sys/resource.h configure:1938: cc -E conftest.c >/dev/null 2>conftest.out configure:1928: checking for sys/procfs.h configure:1938: cc -E conftest.c >/dev/null 2>conftest.out configure:1968: checking for sys/utsname.h configure:1978: cc -E conftest.c >/dev/null 2>conftest.out configure:1968: checking for sys/priocntl.h configure:1978: cc -E conftest.c >/dev/null 2>conftest.out configure:1974:26: sys/priocntl.h: No such file or directory configure: failed program was: #line 1973 "configure" #include "confdefs.h" #include configure:1968: checking for sys/rtpriocntl.h configure:1978: cc -E conftest.c >/dev/null 2>conftest.out configure:1974:28: sys/rtpriocntl.h: No such file or directory configure: failed program was: #line 1973 "configure" #include "confdefs.h" #include configure:2008: checking for sys/mtio.h configure:2018: cc -E conftest.c >/dev/null 2>conftest.out configure:2008: checking for sys/tape.h configure:2018: cc -E conftest.c >/dev/null 2>conftest.out configure:2014:22: sys/tape.h: No such file or directory configure: failed program was: #line 2013 "configure" #include "confdefs.h" #include configure:2008: checking for sys/mman.h configure:2018: cc -E conftest.c >/dev/null 2>conftest.out configure:2008: checking for linux/pg.h configure:2018: cc -E conftest.c >/dev/null 2>conftest.out configure:2008: checking for camlib.h configure:2018: cc -E conftest.c >/dev/null 2>conftest.out configure:2014:20: camlib.h: No such file or directory configure: failed program was: #line 2013 "configure" #include "confdefs.h" #include configure:2048: checking for sys/shm.h configure:2058: cc -E conftest.c >/dev/null 2>conftest.out configure:2048: checking for sys/ipc.h configure:2058: cc -E conftest.c >/dev/null 2>conftest.out configure:2088: checking for sys/dkio.h configure:2098: cc -E conftest.c >/dev/null 2>conftest.out configure:2094:22: sys/dkio.h: No such file or directory configure: failed program was: #line 2093 "configure" #include "confdefs.h" #include configure:2088: checking for sys/dklabel.h configure:2098: cc -E conftest.c >/dev/null 2>conftest.out configure:2094:25: sys/dklabel.h: No such file or directory configure: failed program was: #line 2093 "configure" #include "confdefs.h" #include configure:2088: checking for sun/dkio.h configure:2098: cc -E conftest.c >/dev/null 2>conftest.out configure:2094:22: sun/dkio.h: No such file or directory configure: failed program was: #line 2093 "configure" #include "confdefs.h" #include configure:2088: checking for sun/dklabel.h configure:2098: cc -E conftest.c >/dev/null 2>conftest.out configure:2094:25: sun/dklabel.h: No such file or directory configure: failed program was: #line 2093 "configure" #include "confdefs.h" #include configure:2128: checking for sys/types.h configure:2138: cc -E conftest.c >/dev/null 2>conftest.out configure:2128: checking for sys/stat.h configure:2138: cc -E conftest.c >/dev/null 2>conftest.out configure:2128: checking for types.h configure:2138: cc -E conftest.c >/dev/null 2>conftest.out configure:2134:19: types.h: No such file or directory configure: failed program was: #line 2133 "configure" #include "confdefs.h" #include configure:2128: checking for stat.h configure:2138: cc -E conftest.c >/dev/null 2>conftest.out configure:2134:18: stat.h: No such file or directory configure: failed program was: #line 2133 "configure" #include "confdefs.h" #include configure:2168: checking for poll.h configure:2178: cc -E conftest.c >/dev/null 2>conftest.out configure:2168: checking for sys/poll.h configure:2178: cc -E conftest.c >/dev/null 2>conftest.out configure:2168: checking for sys/select.h configure:2178: cc -E conftest.c >/dev/null 2>conftest.out configure:2208: checking for netdb.h configure:2218: cc -E conftest.c >/dev/null 2>conftest.out configure:2208: checking for sys/socket.h configure:2218: cc -E conftest.c >/dev/null 2>conftest.out configure:2248: checking for ieeefp.h configure:2258: cc -E conftest.c >/dev/null 2>conftest.out configure:2254:20: ieeefp.h: No such file or directory configure: failed program was: #line 2253 "configure" #include "confdefs.h" #include configure:2248: checking for fp.h configure:2258: cc -E conftest.c >/dev/null 2>conftest.out configure:2254:16: fp.h: No such file or directory configure: failed program was: #line 2253 "configure" #include "confdefs.h" #include configure:2288: checking for values.h configure:2298: cc -E conftest.c >/dev/null 2>conftest.out configure:2288: checking for float.h configure:2298: cc -E conftest.c >/dev/null 2>conftest.out configure:2328: checking for arpa/inet.h configure:2338: cc -E conftest.c >/dev/null 2>conftest.out configure:2368: checking for bsd/dev/scsireg.h configure:2378: cc -E conftest.c >/dev/null 2>conftest.out configure:2374:29: bsd/dev/scsireg.h: No such file or directory configure: failed program was: #line 2373 "configure" #include "confdefs.h" #include configure:2408: checking for sys/bsdtty.h configure:2418: cc -E conftest.c >/dev/null 2>conftest.out configure:2414:24: sys/bsdtty.h: No such file or directory configure: failed program was: #line 2413 "configure" #include "confdefs.h" #include configure:2448: checking for OS.h configure:2458: cc -E conftest.c >/dev/null 2>conftest.out configure:2454:16: OS.h: No such file or directory configure: failed program was: #line 2453 "configure" #include "confdefs.h" #include configure:2488: checking for attr/xattr.h configure:2498: cc -E conftest.c >/dev/null 2>conftest.out configure:2494:24: attr/xattr.h: No such file or directory configure: failed program was: #line 2493 "configure" #include "confdefs.h" #include configure:2528: checking for fnmatch.h configure:2538: cc -E conftest.c >/dev/null 2>conftest.out configure:2566: checking for header file containing major(), minor() and makedev() configure:2580: cc -c -O conftest.c 1>&5 configure:2574:23: sys/mkdev.h: No such file or directory configure: failed program was: #line 2572 "configure" #include "confdefs.h" #include #include int main() { int i = major(0); i = minor(0); i = makedev(0,0); ; return 0; } configure:2598: cc -c -O conftest.c 1>&5 configure:2625: checking bits in minor device number configure:2686: cc -o conftest -O conftest.c 1>&5 configure:2706: checking whether bits in minor device numbers are non contiguous configure:2762: cc -o conftest -O conftest.c 1>&5 configure:2785: checking for _filbuf() configure:2810: cc -o conftest -O conftest.c 1>&5 configure: In function `main': configure:2801: error: structure has no member named `_flag' configure:2802: error: structure has no member named `_flag' configure:2802: error: `_IOERR' undeclared (first use in this function) configure:2802: error: (Each undeclared identifier is reported only once configure:2802: error: for each function it appears in.) configure:2803: error: structure has no member named `_flag' configure:2803: error: `_IOEOF' undeclared (first use in this function) configure:2804: error: structure has no member named `_cnt' configure:2805: error: structure has no member named `_ptr' configure: failed program was: #line 2790 "configure" #include "confdefs.h" #include int main() { FILE *f; int flag; int count; char *ptr; char c = 0; f = fopen("confdefs.h", "r"); _filbuf(f); _flsbuf(c, f); flag = f->_flag & _IONBF; flag |= f->_flag & _IOERR; flag |= f->_flag & _IOEOF; count = f->_cnt; ptr = (char *)f->_ptr; fclose(f); ; return 0; } configure:2830: checking for __filbuf() configure:2855: cc -o conftest -O conftest.c 1>&5 configure: In function `main': configure:2846: error: structure has no member named `_flag' configure:2847: error: structure has no member named `_flag' configure:2847: error: `_IOERR' undeclared (first use in this function) configure:2847: error: (Each undeclared identifier is reported only once configure:2847: error: for each function it appears in.) configure:2848: error: structure has no member named `_flag' configure:2848: error: `_IOEOF' undeclared (first use in this function) configure:2849: error: structure has no member named `_cnt' configure:2850: error: structure has no member named `_ptr' configure: failed program was: #line 2835 "configure" #include "confdefs.h" #include int main() { FILE *f; int flag; int count; char *ptr; char c = 0; f = fopen("confdefs.h", "r"); __filbuf(f); __flsbuf(c, f); flag = f->_flag & _IONBF; flag |= f->_flag & _IOERR; flag |= f->_flag & _IOEOF; count = f->_cnt; ptr = (char *)f->_ptr; fclose(f); ; return 0; } configure:2875: checking for USG derived STDIO configure:2909: cc -o conftest -O conftest.c 1>&5 configure: In function `main': configure:2897: error: `no' undeclared (first use in this function) configure:2897: error: (Each undeclared identifier is reported only once configure:2897: error: for each function it appears in.) configure:2897: error: syntax error before "filbuf" configure:2901: error: structure has no member named `_flag' configure:2901: error: `_IOERR' undeclared (first use in this function) configure:2902: error: structure has no member named `_flag' configure:2902: error: `_IOEOF' undeclared (first use in this function) configure:2903: error: structure has no member named `_cnt' configure:2904: error: structure has no member named `_ptr' configure: failed program was: #line 2880 "configure" #include "confdefs.h" #include int main() { FILE *f; int flag; int count; char *ptr; char c = 0; f = fopen("confdefs.h", "r"); #ifdef HAVE___FILBUF __filbuf(f); __flsbuf(c, f); #else # ifdef HAVE__FILBUF _filbuf(f); _flsbuf(c, f); # else no filbuf() # endif #endif flag = f->_flag & _IONBF; flag |= f->_flag & _IOERR; flag |= f->_flag & _IOEOF; count = f->_cnt; ptr = (char *)f->_ptr; fclose(f); ; return 0; } configure:2929: checking for errno definition in errno.h configure:2941: cc -c -O conftest.c 1>&5 configure:2962: checking for working const configure:3016: cc -c -O conftest.c 1>&5 configure:3037: checking whether byte ordering is bigendian configure:3055: cc -c -O conftest.c 1>&5 configure:3070: cc -c -O conftest.c 1>&5 configure: In function `main': configure:3065: error: `not' undeclared (first use in this function) configure:3065: error: (Each undeclared identifier is reported only once configure:3065: error: for each function it appears in.) configure:3065: error: syntax error before "big" configure: failed program was: #line 3059 "configure" #include "confdefs.h" #include #include int main() { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } configure:3127: checking whether bitorder in bitfields is htol configure:3151: cc -o conftest -O conftest.c 1>&5 configure: failed program was: #line 3135 "configure" #include "confdefs.h" struct { unsigned char x1:4; unsigned char x2:4; } a; int main() { char *cp; cp = (char *)&a; *cp = 0x12; exit(a.x1 == 2);} configure:3173: checking return type of signal handlers configure:3195: cc -c -O conftest.c 1>&5 configure:3214: checking for uid_t in sys/types.h configure:3248: checking type of array argument to getgroups configure:3281: cc -o conftest -O conftest.c 1>&5 configure:3319: checking for type long long configure:3331: cc -c -O conftest.c 1>&5 configure:3351: checking for prototypes configure:3369: cc -o conftest -O conftest.c 1>&5 configure:3391: checking if compiler allows dynamic arrays configure:3403: cc -c -O conftest.c 1>&5 configure:3424: checking for uid_t in sys/types.h configure:3458: checking for size_t configure:3491: checking for ssize_t configure:3524: checking for pid_t configure:3557: checking for off_t configure:3590: checking for mode_t configure:3623: checking for time_t configure:3646: cc -c -O conftest.c 1>&5 configure:3666: checking for caddr_t configure:3699: checking for daddr_t configure:3732: checking for dev_t configure:3765: checking for ino_t configure:3798: checking for nlink_t configure:3831: checking for blksize_t configure:3864: checking for blkcnt_t configure:3897: checking for clock_t configure:3937: cc -c -O conftest.c 1>&5 configure:3957: checking for socklen_t configure:3991: checking for u_char configure:4024: checking for u_short configure:4057: checking for u_int configure:4090: checking for u_long configure:4124: checking size of char configure:4143: cc -o conftest -O conftest.c 1>&5 configure:4163: checking size of short int configure:4182: cc -o conftest -O conftest.c 1>&5 configure:4202: checking size of int configure:4221: cc -o conftest -O conftest.c 1>&5 configure:4241: checking size of long int configure:4260: cc -o conftest -O conftest.c 1>&5 configure:4280: checking size of long long configure:4299: cc -o conftest -O conftest.c 1>&5 configure:4319: checking size of char * configure:4338: cc -o conftest -O conftest.c 1>&5 configure:4359: checking size of unsigned char configure:4378: cc -o conftest -O conftest.c 1>&5 configure:4398: checking size of unsigned short int configure:4417: cc -o conftest -O conftest.c 1>&5 configure:4437: checking size of unsigned int configure:4456: cc -o conftest -O conftest.c 1>&5 configure:4476: checking size of unsigned long int configure:4495: cc -o conftest -O conftest.c 1>&5 configure:4515: checking size of unsigned long long configure:4534: cc -o conftest -O conftest.c 1>&5 configure:4554: checking size of unsigned char * configure:4573: cc -o conftest -O conftest.c 1>&5 configure:4594: checking if char is unsigned configure:4613: cc -o conftest -O conftest.c 1>&5 configure: failed program was: #line 4602 "configure" #include "confdefs.h" int main() { char c; c = -1; exit(c < 0);} configure:4635: checking if va_list is an array configure:4656: cc -o conftest -O conftest.c 1>&5 configure:4676: checking if struct mtget contains mt_type configure:4689: cc -c -O conftest.c 1>&5 configure:4709: checking if struct mtget contains mt_model configure:4722: cc -c -O conftest.c 1>&5 configure: In function `main': configure:4718: error: structure has no member named `mt_model' configure: failed program was: #line 4714 "configure" #include "confdefs.h" #include #include int main() { struct mtget t; t.mt_model = 0; ; return 0; } configure:4742: checking if struct mtget contains mt_dsreg configure:4755: cc -c -O conftest.c 1>&5 configure:4775: checking if struct mtget contains mt_dsreg1 configure:4788: cc -c -O conftest.c 1>&5 configure: In function `main': configure:4784: error: structure has no member named `mt_dsreg1' configure: failed program was: #line 4780 "configure" #include "confdefs.h" #include #include int main() { struct mtget t; t.mt_dsreg1 = 0; ; return 0; } configure:4808: checking if struct mtget contains mt_dsreg2 configure:4821: cc -c -O conftest.c 1>&5 configure: In function `main': configure:4817: error: structure has no member named `mt_dsreg2' configure: failed program was: #line 4813 "configure" #include "confdefs.h" #include #include int main() { struct mtget t; t.mt_dsreg2 = 0; ; return 0; } configure:4841: checking if struct mtget contains mt_gstat configure:4854: cc -c -O conftest.c 1>&5 configure:4874: checking if struct mtget contains mt_erreg configure:4887: cc -c -O conftest.c 1>&5 configure:4907: checking if struct mtget contains mt_resid configure:4920: cc -c -O conftest.c 1>&5 configure:4940: checking if struct mtget contains mt_fileno configure:4953: cc -c -O conftest.c 1>&5 configure:4973: checking if struct mtget contains mt_blkno configure:4986: cc -c -O conftest.c 1>&5 configure:5006: checking if struct mtget contains mt_flags configure:5019: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5015: error: structure has no member named `mt_flags' configure: failed program was: #line 5011 "configure" #include "confdefs.h" #include #include int main() { struct mtget t; t.mt_flags = 0; ; return 0; } configure:5039: checking if struct mtget contains mt_bf configure:5052: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5048: error: structure has no member named `mt_bf' configure: failed program was: #line 5044 "configure" #include "confdefs.h" #include #include int main() { struct mtget t; t.mt_bf = 0; ; return 0; } configure:5072: checking if struct rusage is declared in sys/resource.h configure:5085: cc -c -O conftest.c 1>&5 configure:5105: checking if struct siginfo contains si_utime configure:5118: cc -c -O conftest.c 1>&5 configure:5112:25: sys/siginfo.h: No such file or directory configure: In function `main': configure:5114: error: storage size of 'si' isn't known configure: failed program was: #line 5110 "configure" #include "confdefs.h" #include #include int main() { struct siginfo si; si.si_utime = 0; ; return 0; } configure:5138: checking if struct sockaddr_storage is declared in socket.h configure:5150: cc -c -O conftest.c 1>&5 configure:5170: checking if an illegal declaration for union semun in sys/sem.h exists configure:5184: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5180: error: storage size of 's' isn't known configure: failed program was: #line 5175 "configure" #include "confdefs.h" #include #include #include int main() { union semun s; ; return 0; } configure:5204: checking if union wait is declared in wait.h or sys/wait.h configure:5221: cc -c -O conftest.c 1>&5 configure:5241: checking if struct stat contains st_spare1 configure:5254: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5250: error: structure has no member named `st_spare1' configure: failed program was: #line 5246 "configure" #include "confdefs.h" #include #include int main() { struct stat s; s.st_spare1 = 0; ; return 0; } configure:5274: checking if struct stat contains st_atimensec configure:5287: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5283: error: structure has no member named `st_atimensec' configure: failed program was: #line 5279 "configure" #include "confdefs.h" #include #include int main() { struct stat s; s.st_atimensec = 0; ; return 0; } configure:5307: checking if struct stat contains st_atim.tv_nsec configure:5320: cc -c -O conftest.c 1>&5 configure:5340: checking if struct stat contains st_atim.st__tim.tv_nsec configure:5353: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5349: error: structure has no member named `st__tim' configure: failed program was: #line 5345 "configure" #include "confdefs.h" #include #include int main() { struct stat s; s.st_atim.st__tim.tv_nsec = 0; ; return 0; } configure:5373: checking if struct stat contains st_atimespec.tv_nsec configure:5386: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5382: error: structure has no member named `st_atimespec' configure: failed program was: #line 5378 "configure" #include "confdefs.h" #include #include int main() { struct stat s; s.st_atimespec.tv_nsec = 0; ; return 0; } configure:5406: checking for st_blksize in struct stat configure:5419: cc -c -O conftest.c 1>&5 configure:5440: checking for st_blocks in struct stat configure:5453: cc -c -O conftest.c 1>&5 configure:5476: checking if struct stat contains st_fstype configure:5489: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5485: error: structure has no member named `st_fstype' configure: failed program was: #line 5481 "configure" #include "confdefs.h" #include #include int main() { struct stat s; s.st_fstype[0] = 0; ; return 0; } configure:5509: checking for st_rdev in struct stat configure:5522: cc -c -O conftest.c 1>&5 configure:5543: checking if struct stat contains st_flags configure:5556: cc -c -O conftest.c 1>&5 configure: In function `main': configure:5552: error: structure has no member named `st_flags' configure: failed program was: #line 5548 "configure" #include "confdefs.h" #include #include int main() { struct stat s; s.st_flags = 0; ; return 0; } configure:5577: checking for wait3 that fills in rusage configure:5620: cc -o conftest -O conftest.c 1>&5 configure:5643: checking for mlock configure:5671: cc -o conftest -O conftest.c 1>&5 configure:5693: checking for mlockall configure:5724: cc -o conftest -O conftest.c 1>&5 configure:5746: checking for va_copy configure:5766: cc -o conftest -O conftest.c 1>&5 configure:5786: checking for __va_copy configure:5806: cc -o conftest -O conftest.c 1>&5 configure:5826: checking for working ecvt() configure:5854: cc -o conftest -O conftest.c 1>&5 configure:5839: warning: conflicting types for built-in function 'sprintf' configure:5876: checking for working fcvt() configure:5904: cc -o conftest -O conftest.c 1>&5 configure:5889: warning: conflicting types for built-in function 'sprintf' configure:5926: checking for working gcvt() configure:5954: cc -o conftest -O conftest.c 1>&5 configure:5939: warning: conflicting types for built-in function 'sprintf' configure:5976: checking for __dtoa configure:5989: cc -o conftest -O conftest.c 1>&5 /tmp/ccEQ6Rfl.o: In function `main': conftest.c:(.text+0x21): undefined reference to `__dtoa' collect2: ld returned 1 exit status configure: failed program was: #line 5981 "configure" #include "confdefs.h" extern char *__dtoa(); int main() { int decpt; int sign; char *ep; char *bp; bp = __dtoa(0.0, 2, 6, &decpt, &sign, &ep); ; return 0; } configure:6009: checking for __dtoa that needs result ptr configure:6038: cc -o conftest -O conftest.c 1>&5 configure: failed program was: #line 6017 "configure" #include "confdefs.h" extern char *__dtoa(); int main() { #ifdef HAVE_DTOA int decpt, sign; char *bp; char *ep; char *result; result = 0; bp = __dtoa(1.9, 2, 5, &decpt, &sign, &ep, &result); exit(result == 0); #else exit(1); #endif } configure:6063: checking for unistd.h configure:6102: checking for getpagesize configure:6130: cc -o conftest -O conftest.c 1>&5 configure:6155: checking for mmap that needs ptr to size configure:6304: cc -o conftest -O conftest.c 1>&5 configure:6219: warning: conflicting types for built-in function 'malloc' configure: In function `intr': configure:6227: warning: passing arg 2 of `signal' from incompatible pointer type configure: In function `main': configure:6275: warning: passing arg 2 of `signal' from incompatible pointer type configure:6284: warning: passing arg 2 of `signal' from incompatible pointer type configure:6286: warning: passing arg 2 of `mmap' makes integer from pointer without a cast configure: failed program was: #line 6163 "configure" #include "confdefs.h" #include #include #include #include #include #ifndef MAP_FILE #define MAP_FILE 0 /* Needed on Apollo Domain/OS */ #endif /* This mess was copied from the GNU getpagesize.h. */ #ifndef HAVE_GETPAGESIZE # ifdef HAVE_UNISTD_H # include # endif /* Assume that all systems that can run configure have sys/param.h. */ # ifndef HAVE_SYS_PARAM_H # define HAVE_SYS_PARAM_H 1 # endif # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ # ifdef HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE # else /* no EXEC_PAGESIZE */ # ifdef NBPG # define getpagesize() NBPG * CLSIZE # ifndef CLSIZE # define CLSIZE 1 # endif /* no CLSIZE */ # else /* no NBPG */ # ifdef NBPC # define getpagesize() NBPC # else /* no NBPC */ # ifdef PAGESIZE # define getpagesize() PAGESIZE # endif /* PAGESIZE */ # endif /* no NBPC */ # endif /* no NBPG */ # endif /* no EXEC_PAGESIZE */ # else /* no HAVE_SYS_PARAM_H */ # define getpagesize() 8192 /* punt totally */ # endif /* no HAVE_SYS_PARAM_H */ # endif /* no _SC_PAGESIZE */ #endif /* no HAVE_GETPAGESIZE */ #ifdef __cplusplus extern "C" { void *malloc(unsigned); } #else char *malloc(); #endif jmp_buf jenv; int intr() { signal(SIGSEGV, intr); longjmp(jenv, 1); } int main() { char *data, *data2; int i, pagesize, ps; int fd; pagesize = getpagesize(); /* * First, make a file with some known garbage in it. */ data = malloc(pagesize); if (!data) exit(1); for (i = 0; i < pagesize; ++i) *(data + i) = rand(); umask(0); fd = creat("conftestmmap", 0600); if (fd < 0) exit(1); if (write(fd, data, pagesize) != pagesize) exit(1); close(fd); /* * Next, try to mmap the file at a fixed address which * already has something else allocated at it. If we can, * also make sure that we see the same garbage. */ fd = open("conftestmmap", O_RDWR); if (fd < 0) exit(1); /* * Keep a copy, Apollo modifies the value... */ ps = pagesize; /* * Apollo mmap() is not a syscall but a library function and fails * if it tries to dereference 'ps'. We must use setjmp in order to * catch the failure. */ signal(SIGSEGV, intr); if (setjmp(jenv) == 0) { data2 = mmap(0, ps, PROT_READ, MAP_FILE | MAP_PRIVATE, fd, 0L); } else { data2 = (char *)-1; } if (data2 != (char *)-1) exit(1); signal(SIGSEGV, intr); if (setjmp(jenv) == 0) { data2 = mmap(0, &ps, PROT_READ, MAP_FILE | MAP_PRIVATE, fd, 0L); } else { data2 = (char *)-1; } if (data2 == (char *)-1) exit(1); for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data2 + i)) exit(1); close(fd); unlink("conftestmmap"); exit(0); } configure:6330: checking for unistd.h configure:6369: checking for getpagesize configure:6422: checking for working mmap configure:6579: cc -o conftest -O conftest.c 1>&5 configure:6510: warning: conflicting types for built-in function 'malloc' configure:6605: checking for unistd.h configure:6644: checking for getpagesize configure:6697: checking for mmap that needs ptr to size configure:6869: checking if mmap works to get shared memory configure:6949: cc -o conftest -O conftest.c 1>&5 configure:6973: checking for working alloca.h configure:6985: cc -o conftest -O conftest.c 1>&5 configure:7006: checking for alloca configure:7039: cc -o conftest -O conftest.c 1>&5 configure:7205: checking if quotactl is an ioctl configure:7218: cc -o conftest -O conftest.c 1>&5 configure:7212:30: sys/fs/ufs_quota.h: No such file or directory configure: In function `main': configure:7214: error: storage size of 'q' isn't known configure:7214: error: `Q_QUOTACTL' undeclared (first use in this function) configure:7214: error: (Each undeclared identifier is reported only once configure:7214: error: for each function it appears in.) configure: failed program was: #line 7210 "configure" #include "confdefs.h" #include #include int main() { struct quotctl q; ioctl(0, Q_QUOTACTL, &q) ; return 0; } configure:7238: checking for file locking via fcntl configure:7254: cc -o conftest -O conftest.c 1>&5 configure:7274: checking for uname configure:7287: cc -o conftest -O conftest.c 1>&5 configure:7308: checking for vfork.h configure:7318: cc -E conftest.c >/dev/null 2>conftest.out configure:7314:19: vfork.h: No such file or directory configure: failed program was: #line 7313 "configure" #include "confdefs.h" #include configure:7343: checking for working vfork configure:7494: cc -o conftest -O conftest.c 1>&5 configure:7517: checking for sys_siglist configure:7535: cc -o conftest -O conftest.c 1>&5 configure:7557: checking for BSD compliant getpgrp configure:7579: cc -o conftest -O conftest.c 1>&5 configure: failed program was: #line 7565 "configure" #include "confdefs.h" int main() { long p; /* * POSIX getpgrp() has void parameter... */ p = getpgrp(-1); if (p == getpgrp(1) && p == getpgrp(getpid())) exit(1); exit(0);} configure:7601: checking for BSD compliant setpgrp configure:7626: cc -o conftest -O conftest.c 1>&5 configure: failed program was: #line 7609 "configure" #include "confdefs.h" #include #ifndef HAVE_ERRNO_DEF extern int errno; #endif int main() { errno = 0; /* * Force illegal pid on BSD */ if (setpgrp(-1, 100) < 0 && errno == ESRCH) exit(0); exit(1);} configure:7650: checking for access configure:7678: cc -o conftest -O conftest.c 1>&5 configure:7650: checking for eaccess configure:7678: cc -o conftest -O conftest.c 1>&5 configure:7650: checking for euidaccess configure:7678: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for brk configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for sbrk configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for strerror configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for nice configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for memmove configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7717: warning: conflicting types for built-in function 'memmove' configure:7705: checking for flock configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for lockf configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for fchdir configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for statvfs configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7705: checking for quotactl configure:7733: cc -o conftest -O conftest.c 1>&5 configure:7760: checking for dup2 configure:7788: cc -o conftest -O conftest.c 1>&5 configure:7815: checking for getcwd configure:7843: cc -o conftest -O conftest.c 1>&5 configure:7815: checking for shmat configure:7843: cc -o conftest -O conftest.c 1>&5 configure:7815: checking for semget configure:7843: cc -o conftest -O conftest.c 1>&5 configure:7870: checking for lstat configure:7898: cc -o conftest -O conftest.c 1>&5 configure:7870: checking for readlink configure:7898: cc -o conftest -O conftest.c 1>&5 configure:7870: checking for symlink configure:7898: cc -o conftest -O conftest.c 1>&5 configure:7870: checking for link configure:7898: cc -o conftest -O conftest.c 1>&5 configure:7870: checking for rename configure:7898: cc -o conftest -O conftest.c 1>&5 configure:7870: checking for mkfifo configure:7898: cc -o conftest -O conftest.c 1>&5 configure:7870: checking for mknod configure:7898: cc -o conftest -O conftest.c 1>&5 configure:7925: checking for setreuid configure:7953: cc -o conftest -O conftest.c 1>&5 configure:7925: checking for setresuid configure:7953: cc -o conftest -O conftest.c 1>&5 configure:7925: checking for seteuid configure:7953: cc -o conftest -O conftest.c 1>&5 configure:7925: checking for setuid configure:7953: cc -o conftest -O conftest.c 1>&5 configure:7980: checking for setregid configure:8008: cc -o conftest -O conftest.c 1>&5 configure:7980: checking for setresgid configure:8008: cc -o conftest -O conftest.c 1>&5 configure:7980: checking for setegid configure:8008: cc -o conftest -O conftest.c 1>&5 configure:7980: checking for setgid configure:8008: cc -o conftest -O conftest.c 1>&5 configure:8035: checking for getpgid configure:8063: cc -o conftest -O conftest.c 1>&5 configure:8035: checking for setpgid configure:8063: cc -o conftest -O conftest.c 1>&5 configure:8090: checking for getpgrp configure:8118: cc -o conftest -O conftest.c 1>&5 configure:8090: checking for setpgrp configure:8118: cc -o conftest -O conftest.c 1>&5 configure:8145: checking for getspnam configure:8173: cc -o conftest -O conftest.c 1>&5 configure:8145: checking for getspwnam configure:8173: cc -o conftest -O conftest.c 1>&5 /tmp/ccyRqvLP.o: In function `main': conftest.c:(.text+0xd): undefined reference to `getspwnam' collect2: ld returned 1 exit status configure: failed program was: #line 8150 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char getspwnam(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char getspwnam(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_getspwnam) || defined (__stub___getspwnam) choke me #else getspwnam(); #endif ; return 0; } configure:8200: checking for sync configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for fsync configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for fork configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for wait4 configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for waitid configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for waitpid configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for getrusage configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for getrlimit configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for setrlimit configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8200: checking for ulimit configure:8228: cc -o conftest -O conftest.c 1>&5 configure:8255: checking for execl configure:8283: cc -o conftest -O conftest.c 1>&5 configure:8255: checking for execle configure:8283: cc -o conftest -O conftest.c 1>&5 configure:8255: checking for execlp configure:8283: cc -o conftest -O conftest.c 1>&5 configure:8255: checking for execv configure:8283: cc -o conftest -O conftest.c 1>&5 configure:8255: checking for execve configure:8283: cc -o conftest -O conftest.c 1>&5 configure:8255: checking for execvp configure:8283: cc -o conftest -O conftest.c 1>&5 configure:8310: checking for gethostid configure:8338: cc -o conftest -O conftest.c 1>&5 configure:8310: checking for gethostname configure:8338: cc -o conftest -O conftest.c 1>&5 configure:8310: checking for getdomainname configure:8338: cc -o conftest -O conftest.c 1>&5 configure:8310: checking for getpagesize configure:8310: checking for getdtablesize configure:8338: cc -o conftest -O conftest.c 1>&5 configure:8365: checking for gettimeofday configure:8393: cc -o conftest -O conftest.c 1>&5 configure:8365: checking for settimeofday configure:8393: cc -o conftest -O conftest.c 1>&5 configure:8365: checking for time configure:8393: cc -o conftest -O conftest.c 1>&5 configure:8365: checking for stime configure:8393: cc -o conftest -O conftest.c 1>&5 configure:8420: checking for poll configure:8448: cc -o conftest -O conftest.c 1>&5 configure:8420: checking for select configure:8448: cc -o conftest -O conftest.c 1>&5 configure:8420: checking for chown configure:8448: cc -o conftest -O conftest.c 1>&5 configure:8420: checking for lchown configure:8448: cc -o conftest -O conftest.c 1>&5 configure:8420: checking for times configure:8448: cc -o conftest -O conftest.c 1>&5 configure:8420: checking for utime configure:8448: cc -o conftest -O conftest.c 1>&5 configure:8420: checking for utimes configure:8448: cc -o conftest -O conftest.c 1>&5 configure:8475: checking for ecvt_r configure:8503: cc -o conftest -O conftest.c 1>&5 configure:8475: checking for fcvt_r configure:8503: cc -o conftest -O conftest.c 1>&5 configure:8475: checking for gcvt_r configure:8503: cc -o conftest -O conftest.c 1>&5 /tmp/ccopIQ7G.o: In function `main': conftest.c:(.text+0xd): undefined reference to `gcvt_r' collect2: ld returned 1 exit status configure: failed program was: #line 8480 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char gcvt_r(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char gcvt_r(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_gcvt_r) || defined (__stub___gcvt_r) choke me #else gcvt_r(); #endif ; return 0; } configure:8530: checking for econvert configure:8558: cc -o conftest -O conftest.c 1>&5 /tmp/cceXhbbR.o: In function `main': conftest.c:(.text+0xd): undefined reference to `econvert' collect2: ld returned 1 exit status configure: failed program was: #line 8535 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char econvert(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char econvert(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_econvert) || defined (__stub___econvert) choke me #else econvert(); #endif ; return 0; } configure:8530: checking for fconvert configure:8558: cc -o conftest -O conftest.c 1>&5 /tmp/ccA1FmWY.o: In function `main': conftest.c:(.text+0xd): undefined reference to `fconvert' collect2: ld returned 1 exit status configure: failed program was: #line 8535 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char fconvert(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char fconvert(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_fconvert) || defined (__stub___fconvert) choke me #else fconvert(); #endif ; return 0; } configure:8530: checking for gconvert configure:8558: cc -o conftest -O conftest.c 1>&5 /tmp/ccsGYkE6.o: In function `main': conftest.c:(.text+0xd): undefined reference to `gconvert' collect2: ld returned 1 exit status configure: failed program was: #line 8535 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char gconvert(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char gconvert(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_gconvert) || defined (__stub___gconvert) choke me #else gconvert(); #endif ; return 0; } configure:8585: checking for isinf configure:8613: cc -o conftest -O conftest.c 1>&5 configure:8585: checking for isnan configure:8613: cc -o conftest -O conftest.c 1>&5 configure:8640: checking for rand configure:8668: cc -o conftest -O conftest.c 1>&5 configure:8640: checking for drand48 configure:8668: cc -o conftest -O conftest.c 1>&5 configure:8695: checking for setpriority configure:8723: cc -o conftest -O conftest.c 1>&5 configure:8695: checking for DosSetPriority configure:8723: cc -o conftest -O conftest.c 1>&5 /tmp/ccuReVqA.o: In function `main': conftest.c:(.text+0xd): undefined reference to `DosSetPriority' collect2: ld returned 1 exit status configure: failed program was: #line 8700 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char DosSetPriority(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char DosSetPriority(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_DosSetPriority) || defined (__stub___DosSetPriority) choke me #else DosSetPriority(); #endif ; return 0; } configure:8750: checking for DosAllocSharedMem configure:8778: cc -o conftest -O conftest.c 1>&5 /tmp/ccmoYMxK.o: In function `main': conftest.c:(.text+0xd): undefined reference to `DosAllocSharedMem' collect2: ld returned 1 exit status configure: failed program was: #line 8755 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char DosAllocSharedMem(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char DosAllocSharedMem(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_DosAllocSharedMem) || defined (__stub___DosAllocSharedMem) choke me #else DosAllocSharedMem(); #endif ; return 0; } configure:8805: checking for seekdir configure:8833: cc -o conftest -O conftest.c 1>&5 configure:8860: checking for strsignal configure:8888: cc -o conftest -O conftest.c 1>&5 configure:8860: checking for str2sig configure:8888: cc -o conftest -O conftest.c 1>&5 /tmp/ccQIj7n6.o: In function `main': conftest.c:(.text+0xd): undefined reference to `str2sig' collect2: ld returned 1 exit status configure: failed program was: #line 8865 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char str2sig(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char str2sig(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_str2sig) || defined (__stub___str2sig) choke me #else str2sig(); #endif ; return 0; } configure:8860: checking for sig2str configure:8888: cc -o conftest -O conftest.c 1>&5 /tmp/ccEdzl6d.o: In function `main': conftest.c:(.text+0xd): undefined reference to `sig2str' collect2: ld returned 1 exit status configure: failed program was: #line 8865 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char sig2str(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char sig2str(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_sig2str) || defined (__stub___sig2str) choke me #else sig2str(); #endif ; return 0; } configure:8915: checking for killpg configure:8943: cc -o conftest -O conftest.c 1>&5 configure:8915: checking for sigrelse configure:8943: cc -o conftest -O conftest.c 1>&5 configure:8915: checking for sigprocmask configure:8943: cc -o conftest -O conftest.c 1>&5 configure:8915: checking for sigsetmask configure:8943: cc -o conftest -O conftest.c 1>&5 configure:8915: checking for sigset configure:8943: cc -o conftest -O conftest.c 1>&5 configure:8970: checking for nanosleep configure:8998: cc -o conftest -O conftest.c 1>&5 configure:8970: checking for usleep configure:8998: cc -o conftest -O conftest.c 1>&5 configure:9025: checking for tcgetattr configure:9053: cc -o conftest -O conftest.c 1>&5 configure:9025: checking for tcsetattr configure:9053: cc -o conftest -O conftest.c 1>&5 configure:9080: checking for putenv configure:9108: cc -o conftest -O conftest.c 1>&5 configure:9080: checking for setenv configure:9108: cc -o conftest -O conftest.c 1>&5 configure:9080: checking for snprintf configure:9108: cc -o conftest -O conftest.c 1>&5 configure:9092: warning: conflicting types for built-in function 'snprintf' configure:9080: checking for strcasecmp configure:9108: cc -o conftest -O conftest.c 1>&5 configure:9080: checking for strdup configure:9108: cc -o conftest -O conftest.c 1>&5 configure:9092: warning: conflicting types for built-in function 'strdup' configure:9135: checking for valloc configure:9163: cc -o conftest -O conftest.c 1>&5 configure:9190: checking for madvise configure:9218: cc -o conftest -O conftest.c 1>&5 configure:9245: checking for chflags configure:9273: cc -o conftest -O conftest.c 1>&5 configure: In function `main': configure:9265: error: `choke' undeclared (first use in this function) configure:9265: error: (Each undeclared identifier is reported only once configure:9265: error: for each function it appears in.) configure:9265: error: syntax error before "me" configure: failed program was: #line 9250 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char chflags(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char chflags(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_chflags) || defined (__stub___chflags) choke me #else chflags(); #endif ; return 0; } configure:9245: checking for fchflags configure:9273: cc -o conftest -O conftest.c 1>&5 configure: In function `main': configure:9265: error: `choke' undeclared (first use in this function) configure:9265: error: (Each undeclared identifier is reported only once configure:9265: error: for each function it appears in.) configure:9265: error: syntax error before "me" configure: failed program was: #line 9250 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char fchflags(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char fchflags(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_fchflags) || defined (__stub___fchflags) choke me #else fchflags(); #endif ; return 0; } configure:9245: checking for fflagstostr configure:9273: cc -o conftest -O conftest.c 1>&5 /tmp/ccKIrERi.o: In function `main': conftest.c:(.text+0xd): undefined reference to `fflagstostr' collect2: ld returned 1 exit status configure: failed program was: #line 9250 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char fflagstostr(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char fflagstostr(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_fflagstostr) || defined (__stub___fflagstostr) choke me #else fflagstostr(); #endif ; return 0; } configure:9245: checking for strtofflags configure:9273: cc -o conftest -O conftest.c 1>&5 /tmp/cc4BmJBq.o: In function `main': conftest.c:(.text+0xd): undefined reference to `strtofflags' collect2: ld returned 1 exit status configure: failed program was: #line 9250 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char strtofflags(); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char strtofflags(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_strtofflags) || defined (__stub___strtofflags) choke me #else strtofflags(); #endif ; return 0; } configure:9300: checking for fnmatch configure:9328: cc -o conftest -O conftest.c 1>&5 configure:9354: checking if we may not define our own malloc() configure:9388: cc -o conftest -O conftest.c 1>&5 configure:9367: warning: conflicting types for built-in function 'malloc' configure:9411: checking if link() allows hard links on symlinks configure:9441: cc -o conftest -O conftest.c 1>&5 configure:9463: checking if link() does not folow symlinks configure:9505: cc -o conftest -O conftest.c 1>&5 configure:9530: checking for unistd.h configure:9567: checking if access() does implement E_OK configure:9620: cc -o conftest -O conftest.c 1>&5 configure: failed program was: #line 9575 "configure" #include "confdefs.h" # ifdef HAVE_UNISTD_H # include # endif #ifndef R_OK #define R_OK 4 /* Test for Read permission */ #define W_OK 2 /* Test for Write permission */ #define X_OK 1 /* Test for eXecute permission */ #define F_OK 0 /* Test for existence of File */ #endif #ifndef E_OK #ifdef EFF_ONLY_OK #define E_OK EFF_ONLY_OK /* Irix */ #else #ifdef EUID_OK #define E_OK EUID_OK /* UNICOS (0400) */ #else #define E_OK 010 /* Test effective uids */ #endif #endif #endif #include #ifndef HAVE_ERRNO_DEF extern int errno; #endif main() { int ret = 0; if (access(".", F_OK) != 0) ret = 1; else if (access(".", E_OK|F_OK) != 0) ret = 1; else if (access(".", (R_OK<<4)|F_OK) == 0) ret = 1; exit(ret); } configure:9644: checking for fseeko() configure:9656: cc -o conftest -O conftest.c 1>&5 configure: In function `main': configure:9652: warning: the address of `fseeko', will always evaluate as `true' configure:9676: checking for ftello() configure:9688: cc -o conftest -O conftest.c 1>&5 configure: In function `main': configure:9684: warning: the address of `ftello', will always evaluate as `true' configure:9709: checking for rcmd in -lsocket configure:9728: cc -o conftest -O conftest.c -lsocket 1>&5 /usr/bin/ld: cannot find -lsocket collect2: ld returned 1 exit status configure: failed program was: #line 9717 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char rcmd(); int main() { rcmd() ; return 0; } configure:9751: checking for inet_ntoa in -lnsl configure:9770: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9794: checking for rcmd configure:9822: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9794: checking for socket configure:9822: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9794: checking for socketpair configure:9822: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9849: checking for getservbyname configure:9877: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9849: checking for inet_ntoa configure:9877: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9904: checking for getaddrinfo configure:9932: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9904: checking for getnameinfo configure:9932: cc -o conftest -O conftest.c -lnsl 1>&5 configure:9967: checking for special C compiler options needed for large files configure:9993: cc -c -O conftest.c 1>&5 configure:9984: warning: left shift count >= width of type configure:9984: warning: left shift count >= width of type configure:9986: error: size of array `off_t_is_large' is negative configure: failed program was: #line 9977 "configure" #include "confdefs.h" #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply "#define LARGE_OFF_T 9223372036854775807", since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ # define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main() { ; return 0; } configure:10018: cc -n32 -c -O conftest.c 1>&5 cc: unrecognized option `-n32' cc: unrecognized option `-n32' configure:10009: warning: left shift count >= width of type configure:10009: warning: left shift count >= width of type configure:10011: error: size of array `off_t_is_large' is negative configure: failed program was: #line 10002 "configure" #include "confdefs.h" #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply "#define LARGE_OFF_T 9223372036854775807", since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ # define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main() { ; return 0; } configure:10039: checking for _FILE_OFFSET_BITS value needed for large files configure:10061: cc -c -O conftest.c 1>&5 configure:10052: warning: left shift count >= width of type configure:10052: warning: left shift count >= width of type configure:10054: error: size of array `off_t_is_large' is negative configure: failed program was: #line 10045 "configure" #include "confdefs.h" #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply "#define LARGE_OFF_T 9223372036854775807", since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ # define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main() { ; return 0; } configure:10086: cc -c -O conftest.c 1>&5 configure:10106: checking for _LARGE_FILES value needed for large files configure:10128: cc -c -O conftest.c 1>&5 configure:10173: checking for _LARGEFILE_SOURCE value needed for large files configure:10186: cc -c -O conftest.c 1>&5 configure: In function `main': configure:10182: warning: the address of `fseeko', will always evaluate as `true' configure:10224: checking if system supports Large Files at all configure:10249: cc -c -O conftest.c 1>&5 configure: In function `main': configure:10244: warning: the address of `fseeko', will always evaluate as `true' configure:10245: warning: the address of `ftello', will always evaluate as `true' configure:10292: checking for crypt in -lc configure:10311: cc -o conftest -O conftest.c -lc 1>&5 /tmp/cc0m9sPV.o: In function `main': conftest.c:(.text+0xd): undefined reference to `crypt' collect2: ld returned 1 exit status configure: failed program was: #line 10300 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char crypt(); int main() { crypt() ; return 0; } configure:10330: checking for crypt in -lcrypt configure:10349: cc -o conftest -O conftest.c -lcrypt 1>&5 configure:10377: checking for crypt configure:10405: cc -o conftest -O conftest.c -lcrypt 1>&5